[January 2018] N10-006 New Questions Free Download In Lead2pass 1521q

N10-006 Exam Questions Free Download From Lead2pass:

https://www.lead2pass.com/n10-006.html

QUESTION 1
Which of the following would a technician do to monitor remote traffic through an access point?

A.    Enable an SNMP agent
B.    Enable network mapping
C.    Set monitoring SSID
D.    Select WPA2

Answer: A
Explanation:
Large networks with hundreds or thousands of nodes are difficult to manage without a large staff to monitor every computer. SNMP, which is widely used in local area networks (LANs), lets you monitor network nodes from a management host. You can monitor network devices such as servers, workstations, printers, routers, bridges, and hubs, as well as services such as Dynamic Host Configuration Protocol (DHCP) or Windows Internet Name Service (WINS).

QUESTION 2
Which of the following commands can a network technician use to check whether the DNS server for a given domain is reachable?

A.    nmap
B.    nbtstat
C.    dig
D.    arp

Answer: C
Explanation:
The commanddigis a tool for querying DNS nameservers for information about host addresses, mail exchanges, nameservers, and related information. This tool can be used from any Linux (Unix) or Macintosh OS X operating system. The most typical use of dig is to simply query a single host.

QUESTION 3
Which of the following standards can operate at either 20MHz or 40MHz channel spacing?

A.    802.11a
B.    802.11b
C.    802.11g
D.    802.11n

Answer: D
Explanation:
The 2.4 GHz ISM band is fairly congested. With 802.11n, there is the option to double the bandwidth per channel to 40 MHz which results in slightly more than double the data rate. However, when in 2.4 GHz, enabling this option takes up to 82%[10] of the unlicensed band, which in many areas may prove to be infeasible.
The specification calls for requiring one primary 20 MHz channel as well as a secondary adjacent channel spaced ?0 MHz away. The primary channel is used for communications with clients incapable of 40 MHz mode. When in 40 MHz mode, the center frequency is actually the mean of the primary and secondary channels.

QUESTION 4
A client’s computer is unable to access any network resources. Which of the following utilities can a technician use to determine the IP address of the client’s machine?

A.    ipconfig
B.    nslookup
C.    dig
D.    tracert

Answer: A
Explanation:
ipconfigis a commmand line utility available on all versions of Microsoft Windows starting with Windows NT. ipconfig is designed to be run from the Windows command prompt. This utility allows you to get the IP address information of a Windows computer. It also allows some control over active TCP/IP connections. ipconfig is an alternative to the older ‘winipcfg’ utility.

QUESTION 5
A user’s computer is unable to access the Internet. Which of the following utilities can a technician use to determine if DNS is working?

A.    nbstat
B.    arp
C.    nslookup
D.    ipconfig

Answer: C
Explanation:
nslookupis a network utility program used to obtain information about Internet servers. As its name suggests, the utility finds name server information for domains by querying DNS.

QUESTION 6
Which of the following can MOST likely cause intermittent connection problems with a CAT5 network cable?

A.    Cable has been looped too many times.
B.    Cable has a twist tie attached too close to the connector.
C.    Cable is too warm.
D.    Cable is run too close to a fluorescent light.

Answer: D
Explanation: Cat 5is a twisted pair cablefor carrying signals. This type of cable is used in structured cabling for computer networks such as Ethernet. The cable standard provides performance of up to 100 MHz and is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), and 1000BASE-T (Gigabit Ethernet).

QUESTION 7
Given a subnet mask of 255.255.255.0, how many usable IP addresses would be in that subnet?

A.    250
B.    254
C.    255
D.    256

Answer: B
Explanation:
TheSubnet Maskhowever, determines the “class” of a Network. 255.255.255.0 is a “Class C” network.A class c network can host up to 254 pc’s

QUESTION 8
On which of the following OSI model layers would a MAC address be used?

A.    Network
B.    Data Link
C.    Transport
D.    Physical

Answer: B
Explanation:
The ITU-TG.hnstandard, which provides high-speed local area networking over existing wires (power lines, phone lines and coaxial cables), includes a complete data link layer which provides both error correction and flow control by means of aselective repeatSliding Window Protocol.

QUESTION 9
Joe, a network technician, is troubleshooting in a wiring closet in 2011. The cabling to all the equipment does not match the documentation from 2007. Which of the following configuration management methods has been overlooked?

A.    Change management
B.    System logs
C.    Asset management
D.    Baselining

Answer: A
Explanation:
Change management is the request for to change any configuration which is documented.

QUESTION 10
Which of the following TCP/IP model layers does the OSI model Presentation layer map to?

A.    Transport
B.    Internet
C.    Application
D.    Network Interface

Answer: C
Explanation:
TheApplication layerprovides applications the ability to access the services of the other layers and defines the protocols that applications use to exchange data. There are many Application layer protocols and new protocols are always being developed.

N10-006 dumps full version (PDF&VCE): https://www.lead2pass.com/n10-006.html

Large amount of free N10-006 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDVzI0bUdJdU1ESkk

[January 2018] Latest Released Microsoft MB6-893 Exam Question Free Download From Lead2pass 103q

MB6-893 Exam Dump Free Updation Availabe In Lead2pass:

https://www.lead2pass.com/mb6-893.html

QUESTION 1
You are creating a budget register entry.
You notice that a manual budget reservation will exceed the budget.
What should you do within the budget register entry to satisfy the over-budget condition?

A.    enter recurrence
B.    transfer balances
C.    allocate across periods
D.    allocate across dimensions

Continue reading →

[January 2018] Latest MB6-892 Dumps PDF Free Download In Lead2pass 56q

Latest MB6-892 Dumps PDF Free Download In Lead2pass 100% MB6-892 Exam Pass Guaranteed:

https://www.lead2pass.com/mb6-892.html

QUESTION 1
You are creating new sales agreements for a new customer.
The commitment type is configured to be product quantity commitment.
Which two settings are available for this type of agreement and unavailable for other types of agreements? Each correct answer presents a complete solution.

A.    Amount
B.    Unit
C.    Discount
D.    Quantity

Continue reading →

[January 2018] Lead2pass Microsoft MB2-716 Exam Dumps Free Download 105q

Lead2pass Microsoft MB2-716 Latest Exam Dumps Download:

https://www.lead2pass.com/mb2-716.html

QUESTION 1
Which two series aggregate functions are only available on numeric field data types? Each correct answer presents part of the solution.

A.    Count: Non-empty
B.    Count: All
C.    Avg
D.    Max

Continue reading →

[January 2018] Free Downloading JN0-647 Exam Dumps PDF From Lead2pass 80q

Free Lead2pass JN0-647 PDF Download 100% Pass Exam JN0-647:

https://www.lead2pass.com/jn0-647.html

QUESTION 21
You are asked to merge a RIP network with your OSPF network. As a first step, you establish connectivity between the RIP network and the OSPF network. The RIP network connects to an NSSA area. Which two statements are true in this scenario? (Choose two.)

A.    To share RIP routes with the OSPF network, an export policy will be required on the ABR.
B.    To share RIP routes with the OSPF network, an export policy will be required on the ASBR.
C.    By default, external OSPF routes have a higher route preference than RIP routes.
D.    Be default, RIP routes have a higher route preference than external OSPF routes. Continue reading →

[January 2018] Free Lead2pass CAS-002 PDF Guarantee 100% Get CAS-002 Certification 900q

Free Lead2pass CompTIA CAS-002 PDF Dumps With New Update Exam Questions:

https://www.lead2pass.com/cas-002.html

QUESTION 1
A telecommunication company has recently upgraded their teleconference systems to multicast. Additionally, the security team has instituted a new policy which requires VPN to access the company’s video conference.
All parties must be issued a VPN account and must connect to the company’s VPN concentrator to participate in the remote meetings.
Which of the following settings will increase bandwidth utilization on the VPN concentrator during the remote meetings?

A.    IPSec transport mode is enabled
B.    ICMP is disabled
C.    Split tunneling is disabled
D.    NAT-traversal is enabled

Continue reading →

[January 2018] Lead2pass Offering Free ACMP_6.4 Dumps Files For Free Downloading By ACMP_6.4 Exam Candidates 264q

Lead2pass Provides Free ACMP_6.4 Exam Dumps PDF:

https://www.lead2pass.com/acmp-6-4.html

QUESTION 41
In an Aruba controller based system, the L3 mobility tunnel exists between the home agent and which other element?

A.    the default gateway
B.    the remote AP
C.    the foreign agent
D.    the mobile node
E.    the foreign switch

Answer: C

QUESTION 42
Which match condition can be used by a server derivation rule?(Choose two)

A.    greater than
B.    less than
C.    inverse of
D.    contains
E.    equals

Answer: DE

QUESTION 43
The Master fails with Central Licensing enabled. What happens to the local Controllers?

A.    Locals continue to operate for 1 day
B.    Locals operate for 30 days and accept new APs
C.    Locals continue to operate for 90 days and accepts new APs
D.    Locals can only use their originally installed Licenses
E.    Locals will operate with active APs but not will accept any other APs

Answer: B

QUESTION 44
A network needs to implement L3 roaming. On the Master Controller, the administrator, enabled IP mobility, created a Domain and created the HAT table with all the IP addresses of the local controllers. He then enabled Mobility on the VAPs. The configuration was then saved. L3 Mobility is still not working, what could be the cause? (Choose two)

A.    IP Mobility must be enabled on all controllers.
B.    IP-IP tunnels must be configured between controllers.
C.    The Domain must activated on each controller.
D.    The HAT table must be configured on each controller.
E.    The HAT table must be configured with each controllers supported subnets.

Answer: AC

QUESTION 45
In a campus environment, where are encryption keys sent or stored when users roam between tunneled mode APs on the same controller using 802.1X?

A.    sent to the new AP via GRE
B.    sent to the new AP via IPSec
C.    stored on the controller
D.    stored on the RADIUS server
E.    original AP sends keys to new AP

Answer: C

QUESTION 46
With CPSec enabled, which tunnel protocol is used between APs and Controllers in an Aruba environment?

A.    EAP
B.    SSH
C.    IPinIP
D.    Mobile IP
E.    IPSec

Answer: E

QUESTION 47
In the diagram provided for this question, the wireless user’s laptop is associated with an Aruba AP in tunnel forwarding mode. The AP terminates on the local controller.

471

When the client transmits, where will the 802.11 headers be removed?

A.    AP
B.    L2 Switch
C.    Router
D.    Local Controller
E.    Internet

Answer: D

QUESTION 48
A user connected to a Captive Portal VAP successfully. When the user opens their browser and tries to access their homepage, they get redirected as expected to another URL on the Aruba Controller. However, they see an error message that web authentication has been disabled. What might be a cause of this?

A.    Captive Portal has not been assigned in the SSID profile.
B.    The Captive portal profile has not been assigned to the AAA profile.
C.    A server group has not been assigned to the captive portal profile.
D.    An initial role has not been assigned to the AAA profile.
E.    The Captive portal profile has not been assigned to the initial role.

Answer: E

QUESTION 49
By default, which CLI based remote access method is enabled on Aruba controllers?

A.    RSH
B.    Telnet
C.    SSH
D.    Telnet and SSH
E.    Telnet, SSH and RSH

Answer: C

QUESTION 50
A customer forgot all passwords for a controller. What method could you use to reset the passwords?

A.    Telnet to the controller and login to the password recovery account
B.    SSH to the controller and login to the password recovery account
C.    Connect directly to the serial console and login to the password recovery account
D.    Interrupt the boot process at CP-boot and select password recovery
E.    Open the controller and press the reset switch

Answer: C

ACMP_6.4 dumps full version (PDF&VCE): https://www.lead2pass.com/acmp-6-4.html

Large amount of free ACMP_6.4 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDYmVFcGxYZUE4NHM

[January 2018] Lead2pass Offering Free ACMP_6.4 Dumps Files For Free Downloading By ACMP_6.4 Exam Candidates 264q

Lead2pass Provides Free ACMP_6.4 Exam Dumps PDF:

https://www.lead2pass.com/acmp-6-4.html

QUESTION 41
In an Aruba controller based system, the L3 mobility tunnel exists between the home agent and which other element?

A.    the default gateway
B.    the remote AP
C.    the foreign agent
D.    the mobile node
E.    the foreign switch

Answer: C

QUESTION 42
Which match condition can be used by a server derivation rule?(Choose two)

A.    greater than
B.    less than
C.    inverse of
D.    contains
E.    equals

Answer: DE

QUESTION 43
The Master fails with Central Licensing enabled. What happens to the local Controllers?

A.    Locals continue to operate for 1 day
B.    Locals operate for 30 days and accept new APs
C.    Locals continue to operate for 90 days and accepts new APs
D.    Locals can only use their originally installed Licenses
E.    Locals will operate with active APs but not will accept any other APs

Answer: B

QUESTION 44
A network needs to implement L3 roaming. On the Master Controller, the administrator, enabled IP mobility, created a Domain and created the HAT table with all the IP addresses of the local controllers. He then enabled Mobility on the VAPs. The configuration was then saved. L3 Mobility is still not working, what could be the cause? (Choose two)

A.    IP Mobility must be enabled on all controllers.
B.    IP-IP tunnels must be configured between controllers.
C.    The Domain must activated on each controller.
D.    The HAT table must be configured on each controller.
E.    The HAT table must be configured with each controllers supported subnets.

Answer: AC

QUESTION 45
In a campus environment, where are encryption keys sent or stored when users roam between tunneled mode APs on the same controller using 802.1X?

A.    sent to the new AP via GRE
B.    sent to the new AP via IPSec
C.    stored on the controller
D.    stored on the RADIUS server
E.    original AP sends keys to new AP

Answer: C

QUESTION 46
With CPSec enabled, which tunnel protocol is used between APs and Controllers in an Aruba environment?

A.    EAP
B.    SSH
C.    IPinIP
D.    Mobile IP
E.    IPSec

Answer: E

QUESTION 47
In the diagram provided for this question, the wireless user’s laptop is associated with an Aruba AP in tunnel forwarding mode. The AP terminates on the local controller.

471

When the client transmits, where will the 802.11 headers be removed?

A.    AP
B.    L2 Switch
C.    Router
D.    Local Controller
E.    Internet

Answer: D

QUESTION 48
A user connected to a Captive Portal VAP successfully. When the user opens their browser and tries to access their homepage, they get redirected as expected to another URL on the Aruba Controller. However, they see an error message that web authentication has been disabled. What might be a cause of this?

A.    Captive Portal has not been assigned in the SSID profile.
B.    The Captive portal profile has not been assigned to the AAA profile.
C.    A server group has not been assigned to the captive portal profile.
D.    An initial role has not been assigned to the AAA profile.
E.    The Captive portal profile has not been assigned to the initial role.

Answer: E

QUESTION 49
By default, which CLI based remote access method is enabled on Aruba controllers?

A.    RSH
B.    Telnet
C.    SSH
D.    Telnet and SSH
E.    Telnet, SSH and RSH

Answer: C

QUESTION 50
A customer forgot all passwords for a controller. What method could you use to reset the passwords?

A.    Telnet to the controller and login to the password recovery account
B.    SSH to the controller and login to the password recovery account
C.    Connect directly to the serial console and login to the password recovery account
D.    Interrupt the boot process at CP-boot and select password recovery
E.    Open the controller and press the reset switch

Answer: C

ACMP_6.4 dumps full version (PDF&VCE): https://www.lead2pass.com/acmp-6-4.html

Large amount of free ACMP_6.4 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDYmVFcGxYZUE4NHM

[January 2018] Lead2pass Latest Cisco 840-425 Exam Questions Free Downloading 191q

Lead2pass 840-425 Dumps PDF Free Download:

https://www.lead2pass.com/840-425.html

QUESTION 1
Which LoB focuses primary on growth, profit, people, and cash assets?

A.    Sales
B.    Finance
C.    Senior Leadership
D.    Customer Services

Continue reading →

[January 2018] Free Version Lead2pass Cisco 810-403 PDF Dumps With Exam Questions Download 231q

Lead2pass 100% Valid 810-403 Exam Questions PDF Free Download:

https://www.lead2pass.com/810-403.html

QUESTION 1
Which option is a key concept of the unique Cisco sales approach?

A.    Add as many new Cisco technologies to the solution that meet customer needs.
B.    Start driving outcomes for customers, and go beyond selling and implementing technology solutions.
C.    Put together the most logical set of services for the customer.
D.    Engage in dialog about customer needs and new technologies.

Continue reading →